|
 
 CARBOCOMP® is a
unique versatile, user friendly, microprocessor based MINILAB on
the foundry shop floor. Using the principle of thermal analysis the
CARBOCOMP® enables the shop floor metallurgist to analyze the prime
constituents of the molten metal PRIOR to pouring and is thus a versatile
tool in quality control.
Applications :
Rapid determination of:
-
Carbon in Steels,
Alloy Steels and Super Alloys.
-
Carbon and Silicon
in Cast Irons.
-
CEL and CEV in Cast
Irons.
-
Thermal analysis of
Nodular Irons.
-
Thermal analysis of
Alloyed cast irons.
-
Copper content in
Brasses.
-
Aluminium content in
Copper Aluminium Alloys.
-
Sodium content in
Aluminium Alloys.
-
Forecasting
metallurgical properties of Cast Irons.
|
Salient features :
-
Linearised
Temperature measurement upto 1º C accuracy.
Automatic cold junction compensation.
-
Open thermocouple
detection.
-
Self-test features
to check the system every time after reset.
-
'Calibrate' mode
aids easy field calibration.
-
Automatic detection
of liquidus arrest and solidus arrest points.
-
Separate 7 segments
display for indication result message to show the extent of success
for each measurement.
-
Front Panel selector
switch for selection of parameters.
-
Facility to pre-set
the slope factor for Silicon to suit different grades of Cast irons.
-
Keyboard facility
for alloying elements correction factors to suit different grades of
steels.
-
16 to 20 digit
print-out facility can be provided optionally.
-
Extremely
simple to operate : Connect the instrument
to mains supply, plug in FYKAYS' Thermal Analysis Cups and pour
the metal in. The CARBOCOMP® does the rest of the work and
gives all the results desired.
Technical Specifications:
|
Range
|
0-1372º C
for K type Thermocouple.
1300-1500º C for R/S type thermocouple. |
|
C.J.C.
|
Better
than 0.1º C/º C from 0 to 50º C. |
|
Accuracy
|
Temperature-better than +/- 1º C + 1 count: thermal analysis
results better than +/- 0.025 % in non-ferrous metals, +/- 0.05%
in Cast Irons and +/- 0.025% in Steels. |
|
Indications
|
Light emitting
Diodes and seven segment LEDs of 12mm height. |
|
Power Supply
|
230 V A.C.
50 Hz and 1 phase. |
|
Size
|
300 mm
(D) x 400 mm (W) x 300 mm (H) weight about 4.5 kgs. |
|
Models
|
Desk
mounting or panel mounting versions available. |
Back |
